we bump into Madam Zaskia, and cross her palm with olden coins

Across cobbled streets, we found ourselves in an arcade, filled with ancient slot machines. After I'd won few sweets from a crane, we passed by one of those fortune tellers.

It was a great opportunity to ask for a prediction for 2015. Well, we are still in January, after all.

Madam Zaskia needed large old coins to operate, which we managed to acquire and then after a satisfying 1d clunk, she wound into life and enchantingly began scribbling away on a note which eventually was delivered from a small slot in the front of her booth.

Here's Madam Zaskia's prediction for me, and I shall be intrigued to see what happens on Thursday. I'll be around Chelsea, in case anyone wants to join in.

These fortune tellers remind me of the thrill of seeing another one, when I was in a small town called Eureka, on the West Coast of the USA, a couple of years ago. Right outside the second hand bookstore was a Zoltar.

'What's a Zoltar?' I hear you ask. Why, only the very fortune teller used in the Tom Hanks movie 'Big'.

Of course I had a go, although I don't think I was on the extra lucky fourth turn, on that occasion.

the bitter comes out better with a Seville orange

It's proper marmalade-making season at the moment, so we've slipped some Sevilles into a pan.

The myth goes that Keiller cheaply bought up a cargo of stranded Seville oranges in Dundee. Turns out they were too bitter to eat, so his mother cooked up a rind-inclusive marmalade.

I'm told that marmalade is dwindling in popularity nowadays, with only 5.6% of English eating it, with a mainly 'over 45 years' demographic. It might explain why many hotels have those little pots of jam in flavours like apricot and raspberry for breakfast which, to me, just seems wrong. The Scots still have it ranked at number three amongst the morning preserves, after strawberry and honey.

So for a simple recipe:

Wash the fruit. Cut the oranges in half around the middle. De-pip (any excuse to use the food processor).

Cut some 2-3 cm strips of rind and whack the rest through a julienne blade in the processor.

Add the rind and juice to a pan with water at around 1 cupful per orange. The pips could be added to this in a muslin bag for later removal. Simmer for around an hour to release the pectin. About 1/3 of the liquid will have been reduced away and the rind will be soft and transparent.

Slowly add sugar at approx 2:1 weight ratio and boil for about 20 minutes.

Check a few drips for that not-runny, wrinkle-on-a-cold-plate effect to know when it's done.

Tip into jars.

There.

A yummy jam.

And it's orange.

Even better with home made bread.

serial box channel hop mystery

Icy roads this morning and a few snowflakes falling from the sky. For me, it's bike turbo weather and I've fired up the PC to watch some boxsets whilst pedalling.

In the olden days I'd use DVDs, but for years I've been Netflixed-up which is altogether more convenient.

Except for one thing.

VBS - Vanishing Boxset Syndrome.

It's happened to me a few of times now. The first was "Ashes-to-Ashes", the retro cop series involving time travelling/comas from the 21st Century back to the 1980s. There I was at the end of Season 2, with Season 3 cued-up to watch when the whole Netflix box-set turned to ash.

Back in the day, I watched Weeds across three delivery channels, the first parts on Netflix, then some on iTunes and I finally had to buy the American region code last two series on DVD. Its an excuse to play the Little Boxes opening again, the version below by Elvis Costello.

The latest boxset to disappear is Justified, which I'd been watching on Netflix. I'd just got to the disarming ending of Series 3 and had Series 4 wound past the start as my next viewing, when it suddenly disappeared during the opening parachute flashback sequence. I've looked around and it's now on Amazon Prime, so I can recover from this unexpected blip. I also have a sneaking suspicion that Justified is now on Sky, but whether it's all five series remains to be checked.

It makes me wonder what is going on in the smoke-filled back rooms of the various channel executives? I suppose if I read the small print somewhere it will tell me when these various series will expire, but they don't make much of this when they first advertise the availability of new materials.

Maybe they want me to watch them even faster. I'll need more icy weather and longer pedalling sessions for that to work.

the theory of imitation of everything game

I'd expected The Imitation Game (the one with Benedict Cumberbatch and Keira Knightley about Alan Turing) to do well in the various movie award nominations, and indeed it's up for plenty in the coming weeks. But then I saw The Theory Of Everything (the one with Eddie Redmayne and Felicity Jones about Stephen Hawking).

The Cumberbatch movie is a tough act to follow, and even my accomplice, a hardened sceptic of Cumberbatch, admitted it was well played.

I think the Stephen Hawking movie somehow pips it. At a cheeky level, they both do that bit where the scientist has to look science-y with a blackboard and chalk. There's great 'where will we get the equipment?' moments in the Turing one and opportunities for Cumberbatch to be quite eccentric.

The Hawking story is portrayed with a simple storyline, but somehow elicits a greater emotional response. I hadn't realised it was based upon the book by Hawking's ex-wife, and it made sense to have that (edited) point of view for what was a dramatic and uplifting story. Radmayne's portrayal is extraordinary and sensitively counterpointed by Felicity Jones' portrayal of Jane Wilde.

It's great that these two films arrive in the same year but unfortunate that they will be up against one another for the same awards. Both have merits and are worthy contenders against all the comic book hero movies.

Okay, I'll admit a soft spot for the Lego Movie too, but that's a whole other thing.

Running BT HomeHub 5 with Apple Airport Extreme

A technical post today. I seem to remember that one of the very early uses for blogging was as a sort of technical diary, and that's why I drop occasional posts about technical setups into the flow.

I've already mentioned that I'm now using a BT-installed Home Hub 5, which introduced a couple of challenges to the previous setup. The most obvious was that the master phone socket wasn't the one in the office. It was another one downstairs and close to the front door.

BT's Infinity 2 is actually FTTC VDSL (Fibre to the cabinet, Very-high-bit-rate digital subscriber line) - which means it is still delivering the 'last mile' over copper wires.

The change to a filtered master socket meant that the router now needed to be closer to that socket rather than upstairs in the office, which would have needed a, say, 30 metre ethernet cable run along walls etc. The same style police that administer Christmas Tree inspections would have embargoed stapling that to the walls.

So, was the HomeHub wi-fi signal powerful enough to be used alone? Short answer, No. It would work 'downstairs' in the general neighbourhood of the phone line, but didn't reach to the upper floor well enough.

Finding the signal strength
I use the Mac's own wifi tool to check the signal strengths. Simply 'Option-Click' on the wifi signal in the top bar on a Mac and another little App called Wireless Diagnostics starts up.

Go to it's menu list, select Scan, and it will fire up the wifi network scanner. Jolly useful on a laptop for some quick signal strength checking.

The utility will give suggestions about the best wifi channels but, importantly, will also give the signal strengths, specified as RSSI (Received Signal Strength Indicator).

As a guide anything better than -70db is good, although feeble signals will be as poor as -90db. Remember a 10db drop is ten times weaker. The screenshot above is an anonymised replica of part of my indoor scan, which has even more channels listed in the full version, created by overspill from neighbours etc.

I scrolled down to find the BT Hub's own wi-fi signal hovering at -70db (borderline) and -83db (intermittent) when upstairs in the office. Not good enough for reliable service.

Adding the Airport Extremes
I have some Airport Extremes and Time Capsules, so I thought I'd use them to create a stronger wifi signal. I also decided to keep the HomeHub 5 wi-fi signal separate as a kind of backup, especially when setting it up.

The biggest single lesson I remember from using Airport Extremes and Time Capsules is to reset them before creating a new network. Push a paperclip into the reset for about 15 seconds and sure enough we'e back on factory wifi settings (data on the time capsules is preserved, however).

1) Create a network master
I selected an Airport Extreme to have as the master. I connected it to the router via an Ethernet cable, into one of the LAN connectors (i.e. not the WAN connector). This would extend the router's capability into the Airport Extreme.

Then access the Airport Extreme via its temporary wifi network (something like 'Airport Extreme ab123'). It'll ask how you want to configure it, and I followed the step by step guide, which set it up as a master, with its IP address allocated by the BT HomeHub Router. This is important, because I'm using the router as the main DHCP server for the whole network.

2) Extend the network
Then it was a case of plugging in the other Airport Extremes where they were required and performing a similar operation, connect via temporary wifi, follow the configuration instructions but set them up as 'extend network' instead of 'create network'.

3) Measure the difference
The wi-fi signal difference was incredible. In the office it jumped from a best of borderline -70db to -23db, which is generally classified as exceptional. Even on the generally weaker 5Ghz signal jumped from -87db to -33db (also classed as exceptional).


Simplified version of the final configuration
Schematically the configuration is:

Home Hub 5, including DHCP and its own wi-fi
[ethernet connection to]
Airport Extreme 1, set as Create wifi Network - (lounge/dowstairs) nothing else ethernet attached. Used for laptops etc.
[airgap]
Airport Extreme 2, set as Extend wifi Network - (office/upstairs) also includes ethernet attached wired 1Gb ethernet 24 way switch
[airgap]
Airport Extreme 3, set as Extend wifi Network - (entertainment) includes TV related things like Sky+ and Onkyo sound system

There's a few additional airport expresses and apple TVs sprinkled around, but they are set up as 'join' to the main wifi. Everything gets its IP address nominally from the BT HomeHub.

As a useful tip to reduce latency, I added the DNS server addresses to the Extremes and hard coded their IP addresses, as served from the DHCP in the BT HomeHub.

I seem to now have the place bathed in high performance wifi, as well as a 24-way gigabit switch for the office and its various bits and pieces.

Excuse me if I glow a bit from all the Gigahertz.

all your base are belong to us

I'm back in business after the great switch of the broadband. Here's the before speed...

And here's the after...

I wish I could say it was a smooth transition.

After the engineer left, it worked well for a few hours.

Then, suddenly a big orange light started flashing.

I knew the big orange light could only mean trouble. Although, come to think of it, the similar sized blue light that meant everything was fine was a bit counterintuitive.

I'd have checked the help diagnostics, but they were only accessible with an internet connection, which now wasn't working.

Then a kind of space invaders sensation as I battled through various devices not working.

Now it's approaching 3 o'clock in the morning and I'm again bathed in the good blue light.

zzzz.

creating a hard hat zone for engineering work

I'll be trapped indoors on Monday waiting for The Engineer to Fix The Internet.

They will be doing a broadband update and have to do things indoors between 0800 and 1300 (but please allow an additional four hours after 1300, in case the engineer arrives at the end of the allotted time period).

At some time I'll tell the story of the broadband update, which started in about last August. This should be the final iteration, but I won't tempt fate and say too much until it has been completed.

The engineering connection with today's picture is tenuous, except that I may use some of the waiting-in time to collect a few pictures of politicians wearing hard hats. I've decided that there should be some sort of scoring in the run up to the election. Some starter categories:

Predicted:
- Economy : politicians in Hard Hats (5 points)
- Workforce : politicians in High Visibility jackets talking to workers (5 points)
- Education : politicians in classrooms with school children (5 points)
- Health Service : Politicians in a medical setting (5 points)
- Healthcare : Politicians with a patient/patients (5 points)
- Rural : Wellington boots (green 3, black 5)

Dubious:
- Banking and related : Politicians with bankers, in suits and ties in office setting (-3 points)
- Well heeled people : Politicians playing golf, drinking red wine or champagne (white wine not included) (- 3 points)
- Expected : Politicians drinking cocktails, explaining sleaze or expenses problems (-10 points)
- Everyman : Politicians drinking a beer, smoking a cigarette, or eating chips/fast food (-1 point)
- Sporting : Politicians in lycra, with knee pads, at rugby, polo or similar events (-5 points)

All scoring can be cumulative, except when in bad taste (smoking in a hospital for example).

I may need a tumblr site for this...

unusually quiet in these parts of town?

It's supposed to be back to normal this week, with full commuter trains, busy tubes and plenty of traffic jams. I'm slightly suspicious that there's a stillness in some of the central area.

There's space on usually busy platforms, and even parts of the normally bustling areas around the South Bank and the London Eye are surprisingly quiet.

These are parts of London that don't usually have seasonal effects, but maybe, just for once, everyone is over-travelled and shopped- out?

Subliminal photo taken after reading The Humans by @matthaig1

I was staring out of the window towards the emerging daylight. I could see a trace across the sky, probably a plane inbound to Heathrow. The moon lurked below the tree-line and some kind of satellite was twinkling towards me. Kind of "that's all you'll get with this amount of street lighting around".

I took a picture anyway, and then later I noted a similarity with the cover of a book I've just been reading. Just finished actually. The Humans, by Matt Haig.

It's an enjoyable and humorously written narrative about a killer alien sent to earth to tidy up some loose ends associated with recent prime number theory discoveries. They are the sort of discoveries that could give the earth extra powers.

If it sounds too much like a Doctor Who and the Daleks plotline, it is much more a story of alienation and then the discovery of love.

Our narrator, who assumes we are also from another world, gives us his perceptions of the strange planet earth, whilst he matter-of-factly goes about his amoral mission to remove the solution of the Riemann Hypothesis. He's been made into a surrogate of a Cambridge Professor - the one who'd originally solved the Riemann Hypothesis. If you are wondering, Riemann came up with the zeta function for predicting the incidence of primes in a defined integer number space. Something we all need, apparently.

As well as the moon and stars, the book's cover has a picture of a dog and a squirrel. If the math above sounds like dog-speak, the story still works with many discoveries relayed to the reader as simple observations:

An early one:

“I picked up these books and realised they both said ‘£8.99’ on the back. The interpolation of the entire language I had done with the aid of Cosmopolitan meant I knew this was the price of the books, but I did not have any money. So I waited until no one was looking (a long time) and then I ran very fast out of the shop."

A little later:

“Humans, I was discovering, believed they were in control of their own lives, and so they were in awe of questions and tests, as these made them feel like they had a certain mastery over other people, who had failed in their choices, and who had not worked hard enough on the right answers.”

Of course, things develop as our narrator becomes fascinated with the human condition - no more or I'll start to spoil it.

And I'm still wondering how the cover art became something I emulated in a photograph the next day, without realising the connection?

throwing dice along the wharf

The New Year has more or less resumed its normal rotation this week, with work restarted, traffic jams re-instigated in the usual places, TV schedules back to normal and an early start to the 2015 UK election featuring in every single news broadcast.

Like summer holiday adverts which start on Boxing Day, there's probably been a popular agreement that broadcasters get their spinometers out at the first hint of a new year speech.

The old colour coding won't hack it for the next time around, that's for sure.

Nowadays, there'll probably be talk of big data and deep dive analytics.

It'll be interesting to see how the pundits dance along the coloured wind without dangling from a rope of sand.

Meantime, here's an aerial view of Nathalie Miebach's transformation of some big data.

Weave away, boys, weave away.

In which I bung a heap of extra SSD into my MacBook Air

My day-to-day laptop is a MacBook Air, which I've had since 2010. For crunchier Mac processing I use an iMac and all my main files etc. are all backed up to the rashbre LAN. The amount of storage used in the MacBook Air has casually crept up over the years and although I'll probably replace it one day with a MacBook Pro, now isn't the right time based upon what is anticipated from Apple in the next twist of their product cycle.

Instead, I thought I'd try a simple update to the existing machine, moving it from 256Gb storage to 960Gb (about a terabyte). That should keep the machine current for a lot longer, well past when the predicted 12 inch Airs appear and MacBooks go extra long on battery life.

Apple advise that Airs are preconfigured and can't be changed. I must admit I was expecting to find that things had been soldered inside, but actually the SSD is slotted in.

I soon found a couple of places to get replacement SSDs and ordered one to see what would happen. My machine is quite an old generation although cosmetically it looks almost identical to the sleekest modern ones. This update would make the innards about twice the capacity of the latest Apple machine and well-capable of all its regular tasks.

So what to do? I used a Transcend memory kit. It's well packaged, includes all the tools, an enclosure for the old SSD and is boxed in a manner similar to Apple's own products. I should mention that the shape/configuration of the SSD is specific to the individual MacBook model and needs to be carefully selected. There's also very simplified instructions included and a youtube installation video (which I haven't watched).

The box includes the two screwdrivers for the back of the MacBook Air case and for the internal SSD. Weirdly I'd never really looked at the back of the case to spot the 8 or so screws needing removal.

Before I started to dismantle the machine, I made a copy of its existing disk to the new SSD. I used Carbon Copy Cloner for this, instead if the recommended Disk Utility. That's mainly because CCC handles any errors along the way whereas the Apple-supplied Disk Utility just stops. I then had a cloned copy of the original disk.

I decided to boot the still unopened MacBook Air from the clone attached to USB to check everything had worked. Reboot the machine with the Option key held down, select the USB-attached SSD and yes - it worked. I was moderately surprised that it was a relatively quick boot considering it was across the USB connected drive.

Then to open the case. I arranged the removed screws in a square copying the shape of the MacBook - to ensure I put them back in the right places.

Inside, the vast majority of the MacBook Air is taken up with battery. The processor, memory and SSD are a strip along the top quarter of the innards.

Carefully removing the single screw hooding in the SSD, I swapped in the new one and reassembled everything.

Then a reboot, holding down the Option+R so I could reset the startup disk to the new one.

And Yes- everything works.

Total time - 10 minutes to read instructions and assemble the initial SSD in to a small enclosure. A couple of hours to clone the disk. Ten minutes to test the replacement clone. Fifteen minutes to replace the SSD and reconfigure.

My old free space was around 50Gb. The new free space is around 830Gb. The new speed of the disk is fine. It's slower than a modern machine, partly because of the slower electronics of the 2010 version of the MacBook Air (3Gbit bus being used with 6Gbit SSD) but it is still respectably fast for its expected use.

Even more technical bit, stop here if it is already starting to read like Martian

There's a facility on SSDs called TRIM which is an adjunct to the garbage collection of deleted data. SSDs work differently from hard disks. Some say to switch on TRIM, although with Apple's latest Yosemite OS/X, it is disabled for third party SSDs. Part of the kernel extension signing to prevent rogue changes to OS/X's most sensitive components.

I decided I don't care and won't use TRIM. There is anyway a small utility called TRIM enabler, which can get around the Yosemite restriction, and I do have a copy which I could use for a short time if TRIM recovery was ever needed. Pragmatically, I don't think use of TRIM is really an issue though. I've so much more space than I'm likely to need on this machine that running with/without TRIM is rather academic. Purist tekkies may disagree, but I'll take a slow 2-3 per cent degradation over a few years in preference to twiddling around with the inner protection layers of OS/X.

So all in all, a good and simple upgrade for the MacBook Air.

Blood Swept Lands and Seas of Red (II)

Part of the view from The Shard for New Year included a vista towards Tower Bridge and The Tower of London. Last time I walked past the Tower, it still was still surrounded by the bright red ceramic poppies, which have now been removed.

Apposite then, at the weekend, when the poppy I requested from the original installation arrived at home.

It's one of the 888,246 poppies used in the Tower of London installation 'Blood Swept Lands and Seas of Red' which ran from 5th August to 11th November 2014, as a commemoration of the centenary of the start of the First World War.