building the orange guitar (part 7)

Everything is starting to look orange now.

Although out of the haze, a guitar shaped artifact is beginning to take form.

As I suspected, the bodywork is proving the most difficult. Some of it has been a question of learning as I go along. I've now reached the stage where some of the metal parts are coming together, although there's still a fair amount of wiring to complete inside the body. I've realised that guitar maker Fender put their controls onto little plates for a reason.

By comparison, my design means threading wires all through the body and I'm starting to wonder if that switch in the 'Les Paul' position was such a good idea.

It creates a diagonal channel right through the middle of the guitar, from the plug socket which is bottom left to the switch which is top right.

I've also had a few dramas with the clear coat lacquer, which does all kinds of interesting things after it's been sprayed. I gather I should wait about a week and then to sand it to get it very shiny, using 2000 grit.

I'm agonising over what to do about the fretboard now. I've got a nice rosewood finger board with some cream coloured inserts, but I don't know whether to paint the exposed wood areas. I'm thinking to leave it 'natural' as a tell tale-sign of the 'Made in England' nature of this guitar.

I'm hoping to fire up the circuits this weekend, to check for hum. There's another 20 or so connections to solder first.

I'm gonna need a hacksaw (Guitar Part 1)

There's an article in the weekend papers by a motoring journalist along the lines of 'most cars are roughly the same' and it references a well-known make from which many variants are derived.

It then goes on to make a similar comment about most electric guitars, based upon a conversation with a well-known guitarist.

Now I don't know about either of the statements. It could be like saying all books are the same because they have pages and words in them.

Although, when I was fixing the electronic bit on my acoustic guitar some time ago, I was struck by the craftsman-like innards of the carpentry and thought that even if it had been inexpensively mass-produced, there was considerable sophistication to the construction.

Then I looked at a couple of electric guitars and noticed their relatively simple construction. I think one of them has a nickname as 'the plank' no doubt referencing the way it is put together.

So I've thought of a side-project for February. It's supposed to be FAWM "February is Album Writing Month". I'm not sure if I'll have a bash at that this time, I already have a surfeit of songs.

Instead, in a suitably ham-fisted way, I might have a crack at building a guitar. It's not that I need another one. I have more than my rather basic playing capability.

It just feels like one of those projects that needs to be done. I'm pretty sure I can handle the electronics. I know I can't build a fretboard, so I'll have to source that part. I'll also need to set myself a scarily meagre budget. And I won't be too worried if I have to pick up some of the parts along the way. Was it Carl Sagan that said if you want to make an apple pie from scratch, you first have to invent the universe?

First things first, what shape? I'm thinking expensive-looking Les Paul?

Then I have to decide whether to make it look like other guitars? - generic sunburst colours and so on?

Instead I'm looking at car paint colours. Would a metallic orange be too extreme?

In the words of Jack Bauer, "I'm gonna need a hacksaw."